The correct method of sticking the tire balance weight

The correct way to paste the tire balance weight is to select the appropriate balance weight according to the grams indicated by the balance machine, and then paste or knock in the balance weight at the 12 o'clock position of the tire when the indicator of the balance machine is all red or the center is rotated. The tire balance weight is a counterweight component installed on the wheel of the vehicle. Appropriate counterweight is added to the small part of the wheel to maintain the dynamic balance of the wheel under high-speed rotation. The function of the balance weight is to keep the wheel in dynamic balance under high-speed rotation.

The following is the introduction of the balance block:

1. Due to the complex road conditions, any situation on the road may have an impact on the tires and steel rims, such as bumping into a road platform, passing through potholes at high speed, etc., which may easily cause deformation of the steel rims, so it is recommended that you do it while changing positions. tire dynamic balance;

2. The quality of the car wheels is not uniform. In this high-speed driving process, it will not only affect the comfort of the car, but also increase the abnormal wear of the car tires and suspension system, and increase the difficulty of controlling the car during driving, resulting in Unsafe driving;

3. In order to avoid this situation, before installation, the wheels must go through the special equipment - wheel dynamic balance machine for dynamic balance test, and add appropriate counterweight to the small part of the wheel, so that the wheels can maintain dynamic balance under high-speed rotation , this counterweight is the wheel balance weight.