tire pressure gauge

When in use, press the valve connector tightly to the tire valve, so that the valve core is pressed in, and the reading of the indicator is the tire pressure. When measuring, it is necessary to pay attention to the alignment of the barometer and the valve, and there should be no air leakage, otherwise the measured value will be inaccurate. The value shown on the table is the tire pressure. When using the tire pressure gauge, remind users to pay attention to the following aspects: 1. The vehicle needs to be parked on a flat ground, and the tire pressure must be measured when the car is cold; 2. Remove the valve cover of the tire and measure the pressure of the tire pressure gauge. Align the nozzle with the valve on the tire and press it in vertically. The speed of pressing in needs to be fast so as not to cause air leakage in the tires; 4. According to the tire pressure requirements on the door side and combined with the driver's experience, determine whether the tire pressure meets the requirements; if the tire pressure is too high, the tire pressure The gauge can be used to deflate; if the tire pressure is too low, immediately use the on-board air pump to inflate to the safe tire pressure, and re-measure to check the accurate tire pressure; 5. Cover the valve cap; 6. Check the tire at least once a month air pressure. Before you are familiar with the operation of measuring tire pressure, you can test it several times to make sure the reading is correct.

Neutral packing could be offered for customers. Normally the packing are as follows:

white box+ kraft-paper carton

Packing: 1pcs/bag;4pcs/bag or 10pcs/bag

We can also customize the packing for our customers as well, the specific packing would be discussed with clients before placing the order.

Delivery: normally we can send the commodities out within 15-30 days.

The specific delivery time depends on the items and quantity of your order.

Q1. What is your terms of packing?
A: Normally, we pack our goods in white boxes and Kraft-paper cartons.
In addition, customer can customize packing or logo packing for different requests.
Q2. What is your terms of payment?
A: T/T (normally 30% as deposit, the rest of payments are needed before the delivery but the pictures of the products and package will be showed to you before the payment of balance.) or L/C at sight or negotiable.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF and DDU, etc.
Q4. How about your delivery time?
A: Generally, it will take 15 to 30 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q5. Do you have customized service?
A: Yes, we can customize the products for you according to the samples or technical drawings you sent to us .We can build the molds and fixtures as your request.
Q6. What is your sample policy?
A: We can offer you the samples for free, but we could not afford the freight.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8. Do you allow to do quality check after order completed?
A: Yes,we are warmly welcome you to our factory for check.

Q9. What is your guarantee period of the products?

A: Our guarantee period is for 1 year. If there are any quality problem, we will take all the responsibility.